Directly-prelithiated carbon nanotube film for high-performance flexible lithium-ion battery electrodes

Carbon nanotube (CNT) films are very flexible and serve as active materials for lithium-ion batteries (LIBs). Hence, they have high potential as flexible free-standing electrodes for wearable batteries. However, nanocarbon materials such as CNTs and graphene are of limited use as electrodes because they have a large initial irreversible capacity due to the formation of a solid electrolyte interphase (SEI). Herein, we prelithiated the CNT films to make them available as electrodes for flexible batteries by reducing their irreversible capacity. The SEI is pre-formed through a direct prelithiation (DP) method that brings lithium metal into direct contact with CNT films in an electrolyte. As a result, the capacity of directly-prelithiated CNT film electrodes continues to increase to 1520 mAh/g until 350th cycle of charge/discharge and their initial irreversible capacity vanishes. The changes in the electrochemical properties of CNT film electrodes by DP treatment and their flexibility are investigated.     

Water and dye-free coloration of wool

A water and dye-free heat treatment method was used to color wool fibers. The heat effect changed wool fibers to different colors from white in a nitrogen atmosphere. The influences of heating temperature and time on the colors of wool were investigated and the mechanical property of colored wool fibers was evaluated. The color strength of wool fibers increased as heat treatment temperature and time increased. The tensile strength retention rate of wool fiber was relatively high (≥90 %) when the heat temperature was below 200 °C. The surface morphologies of wool fibers scarcely changed during the heat treatment. The carbon content of fibers was found to reduce by heat treatment, indicating oxidization of components in the wool fibers in the process of coloration. Heat treatment may provide a water and dye-free approach to color wool and other textile fibers, albeit within a limited color range.     

Chemical synthesis of polypyrrole film and its adsorption capacity for aromatic polycarboxylic acids

Polypyrrole (PPy) film was prepared via in-situ chemical polymerization of pyrrole monomer on the surface of red-clay-brick (RCB) substrate. The deposited PPy film was characterized and used as an adsorbent for removal of benzene polycarboxylic acids from aqueous solutions. The effects of solution pH, contact time, initial concentration, and temperature on the adsorption process were systematically investigated to find the optimum operating conditions. Adsorption kinetic data were best fitted by pseudo-second order kinetic model. The adsorption equilibrium data were most represented by the Freundlich isotherm model. The maximum adsorption amounts of Trimellitic, Hemimellitic, and Pyromellitic acids were 189.27, 177.26, and 203.31 mg/g, respectively. The thermodynamic studies indicate that the adsorption was an endothermic and spontaneous process. Also, the PPy-RCB film was successfully regenerated using sodium hydroxide solution. The regenerated PPy-RCB can be reused for more than four successive cycles with a low reduction in adsorption efficiency.     

Influence of synergism caused by organic montmorillonite and nanometer calcium carbonate on mechanical properties and crystallization of polyamide 1010-based composites

This account showed that nanometer-active calcium carbonate (CaCO₃) improved polyamide 1010/organic montmorillonite (OMMT) composites and OMMT boosted polyamide 1010/CaCO₃. The mechanical performance suggested the composites to be reinforced through adsorption forces present between the nanofillers and the matrix. The synergistic effect of CaCO₃ and OMMT increased the yields and shrunk cavities when observed by scanning electron microscopy. The obvious resulting synergism was verified by X-ray scattering techniques after the addition of OMMT. The concentration of CaCO₃ did not change lamellar-size or influence the crystal growth. The effect of CaCO₃ on melting behavior was found less significant than that exert on crystallization behavior.     

Structural and optical properties of cellulose nanocrystals isolated from the fruit shell of <Emphasis Type="Italic">Camellia oleifera</Emphasis> Abel

Cellulose nanocrystals (CNC) with high aspect ratio of 80 have been readily prepared from the inexpensive fruit shell of Camellia oleifera Abel (SCOA) for the first time. In this study, SOCA was consecutively subjected to alkali extraction, hydrogen peroxide bleaching and acid hydrolysis to remove non-cellulosic components and release CNC. The derived CNC possesses a needle-shaped structure that in average diameter and length of 6±2 nm and 500±100 nm, respectively. The crystallinity index of CNC increased to 72 % and the initial decomposition temperature raised to 230 oC. The obtained CNC was formed to nanopaper by vacuum filtration showing high visible light transmittance over 90 %. Thus SOCA derived CNC is of great practical potential to apply in the field of biomedicine, energy, packing, etc. Overall, this study is anticipated to offer new possibility for the CNC production from the inexpensive but abundant agricultural wastes.     

Extraction of rice-planting area and identification of chilling damage by remote sensing technology: a case study of the emerging rice production region in high latitude

Rice is the second largest staple crop in the world and therefore plays an important role in food security. As a thermophilic crop, rice is sensitive to temperature changes. Thus, research on the chilling damage of rice is essential. The Sanjiang Plain is an emerging rice production area and is located at high latitudes in China, the world’s largest rice-producing country. Landsat data were used to extract rice-planting area from 1985 to 2015. MODIS 13Q1, which was uniformly distributed during the growing period of rice, was used to obtain NDVI values of paddies during 2002–2015. Dynamic Identification Index of sterile-type chilling damage and monitoring standard of delayed-type chilling damage were the proposed methods used in this paper, which were used to judge the chilling damage of rice. The results show that in the study region, the rice-planting area in 2015 is nearly 12 times larger than that in 1985. Delayed-type chilling damage occurred in 2002 and 2009, while sterile-type chilling damage occurred in 2005, 2006, 2009, 2010, 2014, and 2015. Comparing with the prevalent meteorological standards, the results indicate that the index and standards proposed in this paper are precise, applicable, and more sensitive than them. The method is a macroscopic and accurate method to identify chilling damage in rice and can also provide a scientific basis to ensuring the stability of rice yield.     

A GIS-aided two-phase grey fuzzy optimization model for nonpoint source pollution control in a small watershed

A method for allocating allowable ranges of total nitrogen (TN) load to nonpoint (diffuse pollution) sources in a watershed has been developed by adopting the two-phase grey fuzzy optimization approach. Competing goals of water quality management authorities and TN load dischargers at nonpoint sources such as paddy field, upland crop field, and residential area are described with linear imprecise membership functions including interval numbers. TN load discharged from each cell of the nonpoint sources is assumed to be transported along with surface, subsurface, and river flow under the conventional first-order kinetic removal with respect to distance. The travel length of the load is estimated with a digital elevation model in a geographic information system (GIS). Uncertainty of river discharge and self-purification coefficients appearing in the TN transport model is also expressed with interval numbers. The GIS-aided grey fuzzy optimization model developed here is applied to the Seimei River watershed, Japan. By solving the optimization model, the allowable load represented by an interval number at each cell is procured, which would be a scientific base for effluent control regarding nonpoint sources in the area.     

Investigating the reduction of sodium adsorption ratio from agricultural waste by rice husk in batch scale and physical model of drain envelop

Sodium adsorption ratio (SAR) is one of the water quality indexes that whose is important due to reuse or depletion to environment. Solutes in drain water can be controlled by adsorption, chemical or biological reaction, organic envelope of drainage. Rice husk is the common option of drainage envelops in paddy fields. In this study, the ability of reduction of SAR by rice husk was evaluated in batch scale and physical model of drain envelops. In the batch experiments, the adsorption of SAR parameters was investigated by adding 2 g of rice husk into a 100 ml of sodium chloride solution. The results indicated that rice husk absorbed calcium, magnesium and sodium, respectively. By increasing the temperature, contact time and pH, adsorption of calcium, magnesium and sodium was increased; however, the higher concentration of sodium in soil solution reduced the percentage of adsorption. In a more realistic state, physical models of subsurface drainage in the paddy fields were made. Drainage envelope treatments included of rice husk (H), combination of 20 and 60 % of husk with gravel (H₂₀G₈₀ and H₆₀G₄₀) and a pipe without envelope (NE). Due to higher drain discharge and more sodium removal (lower SAR in drain water), treatment H with the discharge of 16.2 ml/min and SAR of 1.27 (meq/l)^0.5 was better in comparison with other treatments.     

Validation of dual-crop coefficient method for calculation of rice evapotranspiration under drying–wetting cycle condition

Based on data collected from rice fields under drying–wetting cycle condition, the procedure of dual-crop coefficient (K _cd) approaches was calibrated and validated to reveal its feasibility and improve its performance in rice evapotranspiration (ET _c) estimation. It was found that K _cd based on FAO-recommended basal crop coefficients (K _cb) underestimated dual-crop coefficients in monsoon climate region in East China. The recommended coefficient (K _cp) value of 1.2 was not high enough to reflect the pulse increase of rice ET _c after soil wetting. The K _cb values were calibrated as 1.52 and 0.63 in midseason and late season, and the K _cp value was adjusted as 1.29 after soil wetting in rice field under drying–wetting cycle condition. The dual-crop coefficient curves based on locally calibrated K _cbCal and K _cpCor matched well with the measured crop coefficients and performed well in calculating rice evapotranspiration from paddy fields under drying–wetting cycle condition. So it can be concluded that the procedure of dual-crop coefficient method is feasible in rice ET _c estimation, and locally calibrated K _cb and K _cp can improve its performance remarkably.     

Characterization,Pathogenicity and Chemical Control of <Emphasis Type="Italic">Streptomyces acidiscabies</Emphasis> Associated to Potato Common Scab

The pathogenicity of 10 bacterial isolates was investigated on potato, radish, carrot and beet, including sensitivity and pathogen control efficacy. The isolates were identified by morphological, biochemical and molecular methods. All isolates were pathogenic on radish, carrot, and beet, and were highly virulent on potato. Although the isolates were obtained from different locations in the El Fuerte Valley (Sinaloa, Mexico), they were similar in their morphological, physiological and biochemical characteristics. Sequences of the 16S rRNA gene obtained by PCR were identical for all isolates. These results indicate that the bacterial isolates from potato scabby tissue belong to S. acidiscabies. Furthermore, the effectiveness of fluazinam, both in vitro and under greenhouse and field conditions, represents a possibleoption for chemical control of potato common scab disease. While our results suggest that spraying at seeding is effective in controlling common scab, future studies to combine this treatment with seed dressing before planting will be conducted to determine if there is an increase in disease control.